Abstract
On August 14, 2020, a leak was discovered on Colonial Pipeline Company’s (Colonial) Line 1 pipeline in Huntersville, North Carolina. The release occurred at a dent, previously repaired with a Type A sleeve. Upon further investigation, it was found that external metal loss and a through-wall crack had developed in the dent sometime after the installation of the Type A sleeve. Type A sleeves are a common remediation method used to reinforce and repair certain anomalies on a pipeline. However, because the sleeve ends are not welded to the carrier pipe, Type A sleeves are not pressure-containing. A remediation plan to identify possible integrity threats under Type A sleeves and convert those Type A sleeves to pressure-containing Type B sleeves on Colonial’s mainlines was implemented.
In close conjunction, Colonial and Quest Integrity developed a plan to first identify every sleeve on Colonial’s mainlines. Once the comprehensive sleeve list was compiled, a qualitative analysis of all sleeve locations was initiated. Utilizing multiple inline inspections (ILI) and tool technologies, such as Ultrasonic Wall Measurement (UT-WM), Ultrasonic Crack Detection (UT-CD), and Combo (MFL + Caliper), each sleeve location was reviewed to determine:
- The sleeve type (Type A or Type B).
- Sleeve characteristics (Stacked/Segmented).
- The anomaly type(s) observed under the sleeve.
- The deepest reported metal loss depth (%) under the sleeve.
- The presence of additional metal loss under the sleeve (unreported or reported).
- If metal loss under the sleeve has preferential-to-the-sleeve characteristics.
Results from the sleeve review were used to provide a prioritization of the Type A to Type B conversions.
This paper uses case studies from this sleeve characterization and review project to show:
- Given the right conditions, Type A sleeves may not inhibit external metal loss growth under the sleeve.
- The importance of utilizing multiple ILI inspections and ILI technologies to identify integrity threats.
- The methodology and decision tree to determine potential areas of preferential metal loss under sleeves.
Available after the event



