Geohazards represent a serious integrity threat to pipelines worldwide. Increasingly intense precipitation events and heightened regulatory scrutiny have underscored the need for more robust and proactive geohazard management programs. While most geohazard risks are addressed during the design and construction phases, unforeseen conditions and environmental changes may develop during the service life of the pipeline. Therefore, early identification, evaluation, and management of geohazard-induced loading is essential to reduce the risk of failure. There is a range of methods and tools available to support the management of pipeline loading from external forces, including hydrotechnical / geotechnical instrumentation, remote sensing technologies, and in-line inspection (ILI).
One deficiency in the range of available methods is the measurement of axial stress / strain in pipelines. Axial stress / strain can be severely detrimental to pipeline integrity and can be introduced as a result of manufacturing, construction (e.g. formed bends / trenching and backfilling), and external loading (e.g. landsliding, subsidence, hydrodynamic loads). Accurate quantification of axial stress / strain is essential for engineering assessments, especially when evaluating interacting anomalies that could reduce the tensile strain capacity of girth welds, or be susceptible to global buckling under compressive loads.
Currently, the most established method for predicting total longitudinal stress / strain within pipelines is numerical modelling. This method typically uses Inertial Measurement Unit (IMU) data to define pipeline trajectories and bending strains, and is coupled with ground movement / hydrodynamic models to understand the external load conditions. However, it is acknowledged within the industry that there are some uncertainties associated with this method due to the unknowns and complexities associated with hydro/geohazard loading.
Directly measuring axial stress / strain with ILI rather than numerical modelling is still in its relative infancy with regards to industry-wide adoption; however, it offers a promising alternative method for the quantification of total longitudinal pipeline stress / strain. This presents the potential for direct, rather than calculated, fitness-for-service determinations for operational pipelines subjected to external loading. ROSEN’s novel Micro-magnetic Hysteresis Technology (MHT) is an innovative sensor that can accurately measure uniform longitudinal pipeline stresses with calibration, and supplement IMU to calculate total longitudinal pipeline strains.
This paper presents the theoretical principles of the MHT tool and highlights potential significant benefits of non-harmonic micromagnetic sensors versus other axial stress / strain technologies. Case studies illustrate a practical approach for the effective management of geohazards, demonstrating how MHT can complement conventional ILI, remote sensing technologies, and site instrumentation to support the continued development and enhancement of operator’s geohazard management programs.
Available after the event



