276

Emily Angles1, Shanshan Wu1, Joe Bratton1, Rick Wang2, USA.2

1DNV USA Inc., Dublin, USA. 2TC Energy, Calgary, Canada

Advancements in in-line inspection (ILI) tool technology have significantly improved the reliable detection and characterization of dents in pipelines. Are you reviewing the “raw” caliper signal data and incorporating it into your assessments? If you are (and you should) you’ve probably worked with data that requires intervention prior to utilizing it in your assessment. Practitioners often encounter data that necessitates intervention before it can be effectively used for assessment purposes. Noise within ILI caliper data is common and may arise from various sources, including tool misalignment, sensor position relative to the deformation, tool dynamics, irregularities or roughness on the internal pipe wall surface, and limitations inherent in data acquisition or collection software.

Addressing noise issues in raw caliper data is a critical preliminary step prior to conducting a dent assessment. Addressing noise is complex and serves as the foundation for the entire assessment process. While ILI vendors, pipeline operators, and consultants have developed methodologies and tools to manage such noise, the effectiveness of these solutions can differ depending on the specific type of noise present. In certain rare instances, data quality issues can preclude the possibility of performing a reliable dent assessment.

This paper aims to:

  • Present practical examples illustrating different types of noise observed in raw caliper data,
  • Categorize these noise types according to tool type, technology, pipe characteristics, and more, and
  • Discuss proven approaches for addressing noise and related data quality concerns.

The authors' shared experiences aim to increase industry awareness of this issue and support the ongoing development of innovative techniques to enhance the handling of noise in ILI caliper data.

Read/Download PaperGradeAvailable after the event