250

Ted Anderson1, Robert Dodds2, Thomas Dessein3, USA.2, USA.3

1TL Anderson Consulting, Cape Coral, USA. 2Consultant, Longmont, USA. 3Integral Engineering, Edmonton, Canada

Cracks and crack-like flaws pose a significant risk to the integrity of operating pipelines. A reliable method for predicting burst pressure and remaining life in pipelines that contain crack-like features is of paramount importance.  Pipeline fracture models have evolved significantly since the early1970s, when Battelle developed the original Log Secant model.  The PRCI MAT-8 fracture model, which was published in 2015, represented a significant advance over prior methods.  The MAT-8 model was fit to approximately 200 3D finite element models of pipe joints with axial cracks.  MAT-8 has seen widespread adoption in the pipeline industry over the past decade.

The authors recently completed a major study that generated over 2,000 3D finite element solutions for cracks in pipes.  The new solutions, which will be incorporated into the 2026 edition of the API 579 Fitness-for-Service Standard, cover a wider range of cases than the original MAT-8 work.  For example, the new solutions include circumferential cracks subject to axial and bending loads. For cases where the new solutions overlap with the existing MAT-8 solutions, the former are more accurate than the latter.  Therefore, the authors believe that MAT-8 should be phased out in favor of the FEA-based crack assessment procedure in the new release of API 579.

Read/Download PaperGradeAvailable after the event