1Integral Engineering, Edmonton, Canada. 2ExxonMobil, Houston, USA
The API 1183 committee is reviewing the structure of the Recommended Practice (RP) for the assessment and management of dents and may include a Finite Element Assessment (FEA) screening method for fatigue assessment option under the Level 2 category in the next edition.
This paper proposes a dent assessment framework that incorporates such a screening method, which uses an FEA mesh generated to match the measured profile of the dent. The screening method does require iterations to account for the re-rounding that occurs as internal pressure is raised to match the pressure at the time of the inspection but provides a more rapid assessment than an equivalent Level 3 FEA. In contrast, a Level 3 FEA assessment explicitly models the non-linear indentation process and accurately captures the full stress state and plastic deformations in the dent.
The recommended framework leverages the Level 1 and shape parameter-based Level 2 methods in API 1183, when these are applicable, to limit the number of dents requiring FEA and uses the Level 2 FEA method to further screen dents and limit the number of costly Level 3 FEA that are required. The shape parameter approaches are only applicable to single‑peak dents that are aligned with the pipe axis and are not interacting with other nearby dents. Several authors have also raised concerns about their accuracy and applicability to sharp and skewed single‑peak dents.
The process is fully automated so that the level 2 FEA can be used at low cost rather than the shape parameter approaches in cases where there is low confidence in their accuracy. Automation is at the center of the proposed approach to perform efficient screening analysis; it also enables practical implementation of the Level 2 FEA to perform probabilistic assessments when combined with surrogate function methods.
This work and describes the methods used to reliably apply smoothing of the caliper data, such that the peak depth and character of the dent is not lost and demonstrates the screening process for a pipeline.
The recommended procedure for filtering dents for Level 2 and 3 FEA, and the process for calculating a probability of failure using FEA is proven to deliver clarity and efficiencies for future application of the methods in API 1183.
Available after the event



