1Skipper NDT, Paris, France
Mehdi Laichoubi¹
¹Skipper NDT, Paris, France
For small-diameter distribution pipelines, the effects of active ground movement are difficult to quantify: these lines are typically unpiggable, so IMU-based positional and bending-strain data is generally unavailable, and direct verification relies on excavations that are slow, costly, and often impractical in congested urban corridors. This paper investigates whether the displacement imposed on such lines by a moving slope can instead be measured entirely from above ground.
The work is based on a California distribution network located within an active landslide, where documented ground movement reached several inches per week during the 2023–2024 wet season, prompting the operator, SoCalGas, to suspend service over safety concerns. Three buried steel gas line segments, 3,346 ft in aggregate, were surveyed using above-ground magnetic-based technology, from which the full 3D centerline positioning, depth of cover, and bending strain calculations were derived at high spatial resolution without pipeline contact, service interruption, or ground disturbance. Recorded bending strains were minimal, establishing the baseline state of the assets during a period of confirmed slope activity.
The central contribution is the subsequent step, performed jointly with SoCalGas: a repeat acquisition over the same lines, geometrically referenced to the first, isolating the change in pipeline position and strain attributable to continued ground movement between campaigns. [Measured displacement magnitude, its localization relative to the slide, and correlation with surface monitoring to be reported] The findings indicate that surface magnetometry can act as a remote, non-intrusive means of detecting and quantifying geohazard-driven movement on pipelines where conventional in-line methods cannot reach, giving distribution operators a reliable means to confirm the integrity and operational safety of their assets.
Available after the event



